Contact Us or call (800) 518-2290

Speak to a geotextile expert now!
We answer the phone!

Propex Geotex 102F US Fabric Equivalent is US 230

NTPEP APPROVED - GTX-2019-01-284. US 230 is a woven monofilament filtration geotextile made of 100% high-tenacity polypropylene yarns. US 230 resists ultraviolet and biological deterioration, rotting, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. US 230 will satisfy the requirements as outlined in AASHTO M-288-06 for Permanent Erosion Control & Subsurface Drainage (<15% fines) and meets the following M.A.R.V. values except where noted:

Geotex® 102F is a woven monofilament polypropylene geotextile produced by Propex®, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. The individual filaments are woven into a regular network and calendared such that filaments retain dimensional stability relative to each other. These characteristics make Geotex® 102F ideal for filtration beneath hard armor systems. The geotextile is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. Geotex® 102F conforms to the property values listed below. Propex® performs internal Manufacturing Quality Control (MQC) tests that have been accredited by the Geosynthetic Accreditation Institute – Laboratory Accreditation Program (GAI-LAP). This product is NTPEP approved for AASHTO standards. This data sheet for Geotex® 104F is provided for comparison purposes only.

Propex Geotex 102F Test Data

Property Test Method English Metric
Grab Tensile Strength ASTM D-4632 400 x 315 lbs 1,780 x 1,402 N
Elongation @ Break ASTM D-4632 15 % 15 %
CBR Puncture ASTM D-6241 1,150 lbs 5,118 N
Trapezoidal Tear ASTM D-4533 150 x 165 lbs 668 x 734 N
Trapezoidal Tear ASTM D-4533 150 lbs 668 N
Apparent Opening Size(1,2) ASTM D-4751 40 US Sieve 0.425 mm
Permittivity(1) ASTM D-4491 0.9 Sec⁻¹ 0.9 Sec⁻¹
Water Flow Rate(1) ASTM D-4491 70 g/min/f² 2,852 L/min/m²
Percent Open Area CW-02215 1 % 1 %
UV Resistance @ 500 Hours ASTM D-4355 90 % 90 %
The supplied information is provided as a service to our customers under "Descriptive Fair Use" to show the relationship between our products and the listed manufacturer's products. All values are published on the manufacturer's website per the date listed below. Products are compared using the properties and test methods on US Fabrics' published, website data sheets. As such, not all properties and test methods may be included in this comparison. US Fabrics, its website and products are neither endorsed, nor sponsored by, nor affiliated with the listed manufacturers. All products are registered trademarks of said manufacturers. US Fabrics aims to provide information that is accurate, however does not accept responsibility for any errors or omissions in the information provided on this page or incorporated into it by reference. Please refer to the manufacturer's most recent published data or website to verify accuracy. (1/2021)
Need Help Writing Specifications?
Download our free Guide to Better Geotextile Specifying. ** UPDATED 2024 **
An Expert's Manual for Distributors
Download our free Distributor's Manual on Geosynthetics & Geotextiles. This 49 page manual is packed with useful tips and quick reference materials. ** UPDATED 2024 **
Contractor's Application Guide
Download our free Contractor's Guide for the most effective ways to use geosynthentics. ** UPDATED 2024 **

Product Data Sheets

Select Product

Find our Equivalent

Find USF Equivalent

Helpful Information

Select a Reference