Sleeve-It® SD-1

»   Sleeve-It is a pre-engineered fence post anchor that enhances below-grade foundational stability for fences placed on top of a segmental retaining wall (SRW).
»   Sleeve-It permits a code-compliant fence to be constructed eliminating the 36” offset requirements of IBC 1015.2.
»   Product is typically installed by the retaining wall contractor or fencing contractor DURING the construction of the retaining wall.

• Weight = 7 pounds
• Height = 23.4 inches
• Width = 15.3 inches
• Depth = 30.6 inches

»   23.4 inch height is the only model available.

»   Sleeve-It® SD-1 base should be located 24" below finished grade.
»   Sleeve-It® SD-1 can accommodate up to a 4” x 4” or 4” diameter fence post.
»   Pedestrian rail systems should be limited to 42" height with maximum post spacing of 8'.
 »  Sleeve-It is made from 98% post-consumer recycled polypropylene, making it a great environmentally friendly option for enhancing below-grade foundational stability in fences placed on top of a segmental retaining wall (SRW).

Appropriate Fence Systems:

»   Chain Link: Limit post height to 8' above finished grade with 8' max spacing.
»   Ornamental (Steel, Aluminum, and Wrought Iron): Limit post height to 6' above finished grade with a maximum spacing of 10'.
»   Open Board / Gap Board (70% Open): Limit post height to 6' above finished grade with a maximum spacing of 6'.

»   It is NOT appropriate to use privacy cloth or screening with Sleeve-It® SD-1.

Not recommended for:

»   Wind screens
»   Sound barriers
»   Solid board
»   Privacy fencing
»   Guard Rails

»   Any systems with post heights in excess of 10' or post spacing in excess of 12' should be reviewed by US Fabrics Inc before approval.

»   Product is typically in stock and can ship in 24 hours.